Installation and commissioning of TV satellite receiver

Connect the one end of the antenna coaxial cable indoor connector to the satellite receiver "antenna input" connection port, with the random audio / video cable to the receiver's "video" and "audio" output, respectively, with the TV "video "And" audio "input connected to the power cord and 220V / 50Hz AC connected to open the receiver power switch.

Satellite TV / data receiver (RJ-45 interface) with network interface, but also the network cable connected to the computer network card interface or switch.

Satellite TV receiver by function is divided into two categories: one is the ordinary TV receiver; the second is the TV / data reception machine. Their installation and commissioning methods are as follows:

1. Installation and commissioning of ordinary TV receivers

(1) Connect the signal cable. First, connect the satellite signal input: first check the "RF input" connector is intact, the coaxial cable connector connected to the machine "RF input" side. Second, connect the s video terminal: the s video cable will be the machine's video output and the TV's video input connected. Third, connect the audio and video signals: the "L / R" and "VIDEO" of the unit are connected to the TV's "left / right audio" and "video" inputs, respectively.

(2) debugging content and methods. Satellite receiver debugging is mainly used to call up the remote control configuration "menu", according to the menu prompts, according to the satellite transmission platform to provide the satellite parameters of the satellite receiver parameters configured, the main parameters include:

① according to the satellite to be received, set the satellite receiver to receive the satellite signal downlink frequency;

② set the local oscillator frequency (the specific situation depends on the frequency of the local oscillator frequency calibration value, usually 11250MHz or 11300MHz);

③ set the downstream polarization mode;

④ set the symbol rate;

⑤ Set the error correction mode (FEC: 3/4 or AUTO).

When the parameter is set, press to exit. The receiver will start searching for the program. After the program is searched, the system will automatically add the searched program to the "Satellite Inverter", "Movie Program" or "Music Program" menu and display the searched TV or music program, Otherwise it will prompt "no satellite signal".

Because the receivers produced by each manufacturer have different application interface, therefore, when the parameter setting is carried out, the operation instructions should be operated according to the installation instructions.

2. TV / data receiving one machine installation and commissioning

(1) installation

TV / data receiving machine hardware installation is relatively simple, mainly connected with the signal line is correct, that is, one end of the ultra-five anti-wiring received TV / data receiving machine RJ-45 interface, the other end connected to the computer network card RJ -45 interface; connect one end of the audio and video cable to the video / audio output of the TV / data receiver and the other end to the audio and video input of the TV and turn on the power and the hardware is installed.

TV / data receiving machine software installation is mainly application software installation and receiving software installation. The installation method can refer to the satellite data receiving card application software and receiving software installation (for TV / data receiving machine, do not need to install the driver software as a receiver card).

(2) debugging

The receiving and debugging of the TV program is consistent with the debugging method of the ordinary TV; the receiving and debugging of the IP data broadcast content is carried out according to the steps of receiving the satellite data card, and the IP address of the receiver is set up. Under normal circumstances, IP address is set to 192.168.1.1, the TV / data receiver IP address is set to 192.168.1.2.

The above is a brief introduction to the installation and commissioning of the TV satellite receiver. To learn more about the contents of the HD digital satellite receiver, please pay attention to the official website of kepnixshop.