IPTV Satellite Receiver installation procedures and precautions

1.Preparation before loading

(1) to see whether the user ITV account is open.

(2) to confirm the user's broadband access, to confirm the user port is the ability to open IPTV services.

(3) to determine whether the user Modem support IPTV, if not ready to replace Modem.

(4) check the quality of subscriber lines before installation to see if the bandwidth can reach 4M or more.

2.Investigation site

Planning Modem to the TV line, the use of ultra five lines from the Modem placed tv.

3.Modem configuration principle

(1) modify the computer to 192.168.1.X, subnet mask for 255.255.0.0 without setting the gateway.

(2) after landing successfully click on the network into the broadband settings interface.

(3) create a new PVC, the value is 8/81; mode select "bridge"; bind LAN2 port; business mode is "Other"; DHCP service enable.

(4) the package type is LLC.

(5) note that the PVC allocated to each port must be bound to the port when Modem is set. Avoid the user MAC address of the host into the 8/81 IPTV channel access to the device, resulting in IPTV can not play.

Note: access to the cat is not a different way, but the configuration of the same way, please refer to this way. If you have any questions, please contact the manufacturer.

4.device connection

(1) Modem ITV (LAN2) port is connected to the WAN interface of the set-top box.

(2) set-top box connected TV set. Divided into standard clear connection and HD connection. Standard clear connection using a composite video cable, a total of three lines of red and white yellow, red and white transmission of sound, yellow wire transmission video. Audio and video port corresponding to TV set. HD video line connection available color RGB three line transmission screen, using composite video line of red and white to transmit voice. Or through the HDMI HD interface, using a separate HDMI line to transmit audio and video.

5.satellite receiver set

Specific settings, please watch the IPTV Set-top box settings (set to GSKY V8 DVB-S2 receiver for example) 

The above is about the satellite receiver installation steps and notes of a brief introduction, more about the contents of the IPTV Set-top box, please pay attention to the official website kepnixshop